Custom Bathroom
Vanities Melbourne.
Cut to your size.
Vanity carcasses CNC-cut to your exact dimensions in 18mm HMR moisture-resistant board with Blum soft-close hardware — made at our Noble Park factory and quoted the same way as a kitchen.
Built for wet areas
A bathroom is the harshest room in the house for cabinetry. We build vanity carcasses with the same moisture-resistant board and sealed edges we use in laundries, cut to your millimetre dimensions instead of a fixed retail size — so the vanity fits the wall, the basin and the plumbing you already have.
18mm HMR board
High Moisture Resistant board with sealed edges as standard — not the MDF or particleboard used in most off-the-shelf vanity ranges.
Blum soft-close hardware
Blum hinges and runners on every door and drawer, with a lifetime hardware warranty. Full-extension drawers around the P-trap where needed.
Any size, to the millimetre
Wall-hung or floor-standing, single or double bowl, 450mm to 1800mm wide. Cut to your exact opening — no filler panels.
Basin & tapware pre-cut
Send the basin model and tap spread and we pre-cut the top and back panels. Nothing to trim or drill on site.
Flat-pack or assembled
Flat-pack saves 25–35% and a single vanity assembles in under 20 minutes. Assembled units available if you'd rather install straight away.
2-pac on special order
Spray-painted 2-pac fronts in gloss or matte are available as a special order — tell us the colour when you request your quote.
How to order a vanity
- 01
Measure the opening
Width, depth and height of the space, plus the position of the waste and water outlets. A photo of the wall helps.
- 02
Send your dimensions
Email estimates@contegrity.com.au with the measurements, your basin model and whether you want wall-hung or floor-standing.
- 03
Approve the quote
We come back within 24 business hours with a fixed cabinetry price and a cut list for your approval.
- 04
Delivery or pickup
14–21 days from approved measurements. Melbourne metro delivery from $89, or free pickup from 26 Tower Court, Noble Park.
Bathroom vanity FAQs
Do you make custom bathroom vanities in Melbourne?
Yes. We CNC-cut bathroom vanity carcasses to your exact dimensions at our Noble Park factory — wall-hung, floor-standing, single or double bowl. Send your dimensions to estimates@contegrity.com.au and we'll quote it the same way we quote a kitchen.
What board do you use for bathroom vanities?
18mm Australian HMR (High Moisture Resistant) board with sealed edges as standard — the same material we use for laundry cabinets. Bathrooms are wet areas, so we don't use standard MDF or particleboard carcasses.
Can you cut the basin and tapware openings?
Yes. Send your basin model and tap spread and we'll pre-cut the top and back panels so there is no on-site carpentry. Wall-hung vanities can be supplied with a rail or bracket-ready back panel.
How much does a custom bathroom vanity cost?
Vanity carcasses are priced per cabinet, similar to laundry cabinets — a single 900mm vanity typically lands in the $500–$1,200 range for cabinetry only. Benchtops, basins and tapware are supplied by you or quoted separately.
Do vanities come flat-pack or assembled?
Both. Flat-pack saves around 25–35% and a single vanity usually assembles in under 20 minutes. Assembled units are available if you'd rather install straight out of the van.
Can I get a 2-pac finish on a vanity?
2-pac spray-painted fronts are available on bathroom vanities as a special order. Tell us the colour and finish (gloss or matte) when you request your quote.
How long does a custom vanity take?
Typical lead time is 14–21 days from approved measurements, the same as our kitchen and laundry orders. Delivery is across Melbourne metro, or free pickup from Noble Park.